-
Датчик движения микроволны
-
Датчик движения Dimmable
-
Датчики присутствия
-
dimmable светодиодные драйвер
-
Датчик движения Pir
-
На с датчике функции
-
Водитель датчика
-
Датчик дневного света
-
Датчик движения DC
-
Датчик движения УЛ
-
Датчик движения DALI
-
беспроводным датчиком
-
Водитель СИД ДАЛИ2.0 Диммабле
-
DALI Dimmable вело водителя
-
dimmable водитель 1-10V водить
-
водитель водить триака dimmable
-
непредвиденный водитель водить
-
Водитель IOT
2W LED Emergency Kits self contained emergency pack With 5 Years Warranty And 3 Hours Emergency Time
| Место происхождения | Китай |
|---|---|
| Фирменное наименование | Merrytek |
| Сертификация | CE, UKCA, UN38.3,MSDS |
| Номер модели | KE026-02AM180HB |
| Количество мин заказа | 100 |
| Цена | Подлежит обсуждению |
| Упаковывая детали | Сначала упакована в пузырьковый пакет, а затем усилена картонной упаковкой для наружной упаковки |
| Время доставки | 1, образец и небольшой заказ: в течение 5 рабочих дней после получения оплаты. 2, объемный заказ: 3- |
| Условия оплаты | T/T или Западный Союз |
| Поставка способности | 101000 штук в месяц |
Свяжитесь со мной для бесплатных образцов и купонов.
WhatsApp:0086 18588475571
WECHAT: 0086 18588475571
Скайп: sales10@aixton.com
Если вы имеете любую заботу, то мы предусматриваем 24-часовую интерактивную справку.
x| Номинальное входное напряжение | 220-240Vac 50Hz /60Hz | Аварийная власть | 2W ((Можно настроить) |
|---|---|---|---|
| Чрезвычайное время | 180 мин (можно настроить) | Гарантия | 5 лет (включая аккумулятор) |
| Выходное напряжение нагрузки | 20-60Вдц | Рабочая температура | 0 ℃ ~ 50 ℃ |
| IP-рейтинг | IP20 | Тип батареи | LifePO4 6,4 В 1800 мАч |
| Выделить | 2W LED emergency kit with warranty,self-contained emergency pack 3 hours,LED emergency driver 5 years warranty |
||
Constant power output LED emergency power supply with wide output voltage range, featuring LifePO4 battery technology and comprehensive safety protections.
- Constant power output LED emergency power supply with wide output voltage range
- Input relay switching
- High safety, high performance, long life LifePO4 battery
- Integrated battery management system
- Manual test and automatic test selection options
| Charge Part | KE026 | 02AM180HB | |
|---|---|---|
| Electrical Parameters | Rated input voltage | 220-240Vac 50Hz/60Hz |
| Rated input current | 0.06A Max. @230Vac | |
| Input inrush current | 10A(Twidth=100us 50% Ipeak )@230Vac (Cold start at full load) | |
| Power factor | ≥0.5@230Vac | |
| Input power | <4W@230Vac | |
| Battery charging current | 200mA Max. | |
| Battery charging time | 24 hours Max. | |
| Emergency Part | Operating mode | Emergency mode |
| Load type | LED | |
| Emergency power | 2W | |
| Emergency time | 3 hours | |
| Load output current | 100-30mA | |
| Battery | Type & Capacity | LifePO4 6.4V 1800mAh (meets emergency time at 25℃) |
| Warranty | 5 years @5~60℃ | |
| Exception Driver Requirements | Surge current | 8A |
| Input current | 3A Max. | |
| Output current | 2A Max. | |
| LED Indication (Manual test) | Charging | Green light |
| Fault | Green light off | |
| Manual test | Default | |
| Auto test | Pin open | |
| Auto Testing Status Indicators | ||
| Battery fully charged & operational | Solid green | |
| Battery charging | Flashing green (1 sec on, 1 sec off) | |
| Protection Features | Abnormal protection | Over-charge/deep discharge protection |
| Output over-voltage protection | Yes | |
| Output overload protection | Yes | |
| Output short circuit protection | Yes | |
| Operating Environment | Operating temperature/humidity | 0℃…+50℃ Humidity:20%-75%(without condensation) |
| Storage temperature/humidity | -5℃-35℃ | |
| Case Max. Temp(Tc) | 75℃ | |
| Standards & Certifications | Withstand voltage | 3000Vac 5mA 60s (Input "L N" - output "SEC+ SEC-") |
| Safety standard | EN61347-1, 60598-2-22, 61347-2-7, 62034 | |
| EMC standard | EN55015, EN61000-3-2, EN61000-3-3 | |
| Battery standard | UN38.3 | |
| Environmental protection | Compliant with RoHS | |
| Certification | CE | |
| Physical Specifications | Input/output terminals | Press terminal, wire diameter: 0.75-1.5mm² |
| IP rating | IP20 | |
| Type of protection | Class 2 | |
| Installation type | Built-in installation | |
| Installation dimension | 211×42.5×25mm | |
| Packaging | White box + Instruction manual + clapboard + outer carton (K=A) | |
| Weight | 230g | |
| Lifespan | 5 years @Ta | |
- Before installation, set Pin short: Manual Test
- Connect the wire according to the wiring diagram
- L, N power on, Switch on S1. Then the load lamp turns on, the emergency driver indicator light turns green, and the emergency power supply is normal charging. Turn off Switch S1, and the load lamp turns off
- Emergency Simulation: Switch on, the load lamp turns on, press the switch (TEST SWITCH), then switch to emergency mode, the indicator light of the emergency driver will be extinguished. Release the switch (TEST SWITCH), then the lamp is powered by the LED driver, and the indicator light will turn on
- Before installation, set Pin open: Automatic Test
- Connect the wire according to the wiring diagram
- L, N power on, start the clock, and perform a periodic self-test. To replace the battery, turn off the power supply, and re-time
- The battery should be recharged and discharged semiannually in normal use conditions
- Do not connect to the circuit when the battery is not used to prevent over-discharge of the battery due to self-consumption of the circuit board
- Please keep the battery away from heat sources when installing and using it, and only allow it in a certain working temperature range
- The battery should be stored in a cool and dry environment
- After a long time of storage, the battery is cycled every 12 months as required
- AC power is off, and the clock lasts for 7 days. Power on and re-time. To replace the battery, turn off the power supply, and re-time

